Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Lycanthromancer

Pages: [1]

Help / Re: Help with Endless Nights VI

« on: January 03, 2012, 05:39:15 PM »

Quote from: marohair39 on January 03, 2012, 12:08:41 AM

those are all cep haks, ... an older version of it. cep, went through a lot of name changes through its updates, so old modules made using cep, require older (those same used in making them) to work. In this case, it's asking about cep 1.5 version haks, you can download them here, if you scroll down a bit: http://nwvault.ign.com/cep/downloads/

there's a EN VI made using cep v2, i think, maybe maybe, could work with the last cep versions, without having to download all the old versions.

Thanks. I assume 2.3 is the latest version, though considering how slapdash everything seems to be (especially on NWVault), there's no telling.

[edit] Actually, after digging through everything on that page, it looks like 2.4 was just released.

*Sigh*

Help / Help with Endless Nights VI

« on: January 02, 2012, 09:55:48 PM »

Okay, I don't know if I'm doing something wrong here, but I have Windows XP, along with NWN + SoU + HotU + update 1.69 + CEP3.5rc1a, and every time I try to download and install Endless Nights VI (with the CEP merge), I get the .mod file, EN_QST (.CDX, .DBF, and .FPT), Endless_Nigh0010.hak, and Endless_Nigh0059.tlk. Every time I try to run it directly, it tells me it's missing a .hak file. When I try to open it in the toolset, it tells me:

Quote

This module requires the following Hak Paks, but they were not found.
Ceptexture
Cepportrait
Cepplace
Cepcreature
Cepbaseitem
Cepanatomy
Cep2da
Cep1patch
Cep1patch150
Cep1patch152
Cep1patch153

Anything anyone can tell me to help?

Help / Re: Cannot choose powers/spells/maneuvers/etc in the character creator. Help!

« on: December 29, 2011, 06:25:40 PM »

Quote from: DM Heatstroke on December 29, 2011, 06:16:52 AM

Quote from: Lycanthromancer on December 28, 2011, 04:04:39 PM
Is there a newer version I should be using? And if so, could I have a link?

Top of your screen, under PRC Downloads. That's where the latest version will always be.

Thanks a lot for that. Most of my issues appear to have cleared up.

Though I did have some issues with a psion/rogue using Psychic Reformation. He had a bunch of non-psion/non-rogue stuff equipped through UMD, and when I'd PsyRef it'd give me a dozen or so 'cannot equip armor during battle' messages and then fail to allow me to choose my psion powers at all.

Also, I can't change any of my 1st-3rd level options outside of skill points and powers. Any way to do this? I'm pretty sure PsyRef only lets you augment back to 7th level, and that grows to 4th with Overchannel. (Though wilders apparently can with wild surge). Any way to fix this?

Hmm. And taking Expanded Knowledge means you learn the power forever and ever, regardless of if you PsyRef the feats out or not.

Help / Re: Cannot choose powers/spells/maneuvers/etc in the character creator. Help!

« on: December 28, 2011, 04:04:39 PM »

I used the NWN PRC Hakpack Setup 3.4 (it was the last one on the original website). It was in a .exe file, which I then used the installed module updater to install on HotU (I have all the original first-run installation discs for NWN, SoU, and HotU, rather than the Diamond edition, upgraded with the HotU 1.69 patch).

I've been playing HotU.

Is there a newer version I should be using? And if so, could I have a link? Do I have to do anything unusual to get it to work since I already have 3.4 installed?

Aaaand...I only saw regular bolts; I didn't actually look to see if there was a temp mod on them. It works fine after all; thanks!

I appreciate the help, sir.

Help / Re: Cannot choose powers/spells/maneuvers/etc in the character creator. Help!

« on: December 27, 2011, 04:39:04 PM »

Quote from: xwarren on December 27, 2011, 02:57:03 AM

That's strange. This feat only requires Psionic Focus feat (gained by all psionic classes at lvl 1).
What is your character build?
I'll test this in game.

Edit: On feat selection screen search for Psionic Feats... , you'll find Expanded Knowledge there.

I've done it as a human, bozak draconian, naztharune rakshasa, and bralani psion 3+. Doesn't matter what feats or skills, 'cuz it happens each time. And Expanded Knowledge doesn't show up under Psionic Feats...ever. I've looked.

Also, is there any advice on getting Leadership-based cohorts to actually work? Stock ones won't work at all, and custom ones just follow me around and don't actually do anything. There're no PRC options for them, and they won't talk to me, so getting them doing anything doesn't work.

[edit] Oh, and I'm level 17, but the highest level cohort I can get is 8th, despite having an 18 Cha.

[edit 2] Heh. And Bolt? Doesn't give me any enhancement bonuses at all, despite augmentation and Overchanneling, even when I spend a ton of power points on them. 20 pp for 99 regular arrows or bolts? No thank you.

[edit 3] Are male nymphs supposed to be overwritten with the female phenotype regardless of what you change them to? Makes for some interesting RP when they have deep gravelly voices and chest-mounted flotation devices...

Help / Re: Cannot choose powers/spells/maneuvers/etc in the character creator. Help!

« on: December 26, 2011, 07:41:16 PM »

Alrighty. One last thing. I can't access the Expanded Knowledge psionic feat at all. It's just not showing up. I updated to 1.69HotUUpdate (since I have all the original releases, not the Diamond Edition). That took care of a ton of glitches I was having, but the feat still isn't showing up regardless of level.

Any ideas?

Help / Re: Cannot choose powers/spells/maneuvers/etc in the character creator. Help!

« on: December 23, 2011, 04:15:47 PM »

Yes, I'm a PRC virgin. >.>

Thanks for the help, good sir. I shall patch it up via 1.69, then try it forthwith.

Help / Cannot choose powers/spells/maneuvers/etc in the character creator. Help!

« on: December 22, 2011, 08:01:50 PM »

I'm using Windows XP with Service Pack 3 on a HP Compaq nc6120, the recommended Java programs and the .NET framework etc, as well as the 3.4 update for the PRC and character creator listed here, and I installed everything and got things set up according to the instructions in the manual here (using the Java CC instructions, and adding all the .hak files the installation program added to the [hak] folder).

Spoiler (hover to show)

For some reason, every time I try to create a character NOT using the original base classes (bard, cleric, druid, sorcerer, wizard), the program skips the steps to adding psionic powers, spells, maneuvers, and so on. It works with wizard, cleric, druid, and so on, but outside the core set, it just won't do it. It even lets me choose the new spellset, just not with any of the new classes.

Oh, and in case it's related, the program keeps giving me the error code 'bad strref' instead of the names of the abilities on one of the skills (between Craft Weapon and Jump; dunno which one it is, since it gives me the same error message instead of the description when I click on it).

Anybody have any idea how to fix this to make it work properly? If you need more info I can get it to you. Thanks for your time!

Pages: [1]